You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 21 Current »

Step 3: Specify material properties

Main Menu > Preprocessor > Material Props > Material Models

In the Define Material Model Behavior menu, double-click on Structural, Linear, Elastic, and Isotropic.

Enter 200e9 for Young's modulus EX, 0.3 for Poisson's Ratio PRXY.

Click OK. Close the Define Material Model Behavior menu.

Save Your Work

Toolbar > SAVE_DB

Go to Step 4: Specify geometry

See and rate the complete Learning Module

Go to all ANSYS Learning Modules

  • No labels