You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 57 Next »

Step 3: Specify Boundaries in GAMBIT

Label the boundaries according to the figure shown below.

Higher Resolution ImageVisit page in new window

We will label edge A as farfield1, edges B and C as farfield2, edges D and E as farfield3, edges E,G and H as farfield4 and the edges I and J as cylinder.

Edges

Name

A

farfield 1

B,C

farfield 2

D,E

farfield 3

F,G,H

farfield 4

I,J

cylinder

Operation Toolpad > Zones Command Button > Specify Boundary Types

Specify boundary according to the table above. Next to Name, enter the name accordingly. Leave the Type as WALL. We will specify boundary type using FLUENT.

Save Your Work

Main Menu > File > Save

Export Mesh

Main Menu > File > Export > Mesh...

Save the file as cylinder.msh.

Make sure that the Export 2d Mesh option is selected.

Check to make sure that the file is created.

Go to Step 4: Set Up Problem in FLUENT

See and rate the complete Learning Module

Go to all FLUENT Learning Modules

  • No labels