Author(s): Joshua Wallace & Steve Scampoli, ANSYS Inc.
Problem Specification
1. Pre-Analysis & Start-Up
2. Geometry
3. Physics Setup
4. Numerical Solution/Results
5. Verification & Validation
Thermal Analysis of an Electrical Wire
Created using ANSYS AIM 18.2
Problem Specification
For this demonstration we are asked to determine the centerline temperature Tc and surface temperature of a bare steel wire carrying a current I and having a resistance R. The surface convection coefficient between the wire and the ambient air (at temperature Ta) is h.
Given values:
k=13 BTU/hr*ft*F
h=5 BTU/hr*ft2*F
R=0.0001 /ft
Ta=70 F
I=1000 A