Author(s): Joshua Wallace & Steve Scampoli, ANSYS Inc.
Problem Specification
1. Pre-Analysis & Start-Up
2. Geometry
3. Physics Setup
4. Numerical Solution/Results
5. Verification & Validation
Verification & Validation
From the Ansys Mechanical APDL Verification Manual problem VM119 the calculated centerline temperature was 420.0 F (215.6 C). The percent error between these two calculations is 0.102%. In conclusion, the solvers calculation for the centerline temperature is accurate.
Simulation Value | Verification Value | % Difference |
215.38 | 215.6 | 0.102% |