Author: Rajesh Bhaskaran & Yong Sheng Khoo, Cornell University
Problem Specification
1. Pre-Analysis & Start-Up
2. Geometry
3. Mesh
4. Setup (Physics)
5. Solution
6. Results
7. Verification & Validation
Step 3: Mesh
Save your work in Workbench window. In the Workbench window, right click on Mesh, and click Edit. A new ANSYS Mesher window will open.
Use the default mesh. Under Outline, right click on Mesh and click Generate Mesh. This should be the mesh appear in the Graphics window.