Author(s): Sebastian Vecchi, ANSYS Inc.
Problem Specification
1. Pre-Analysis & Start-Up
2. Geometry
3. Mesh
4. Physics Setup
5. Results
Heat Conduction in a Cylinder
Created using ANSYS AIM 18.1
Problem Specification
Consider the hollow cylinder pictured below with outer radius (ro=3.25in), inner radius (ri=1.75in) and length (l=10 ft). The temperature at the inner radius of the cylinder is 400 degrees Fahrenheit while the outside radius of the cylinder is 80 degrees Fahrenheit with a coefficient of heat transfer of 0.04 Btuh*ftF.
In this tutorial, we will utilize ANSYS AIM to find the temperature throughout the pipe, total heat flux and directional heat flux.