You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 21 Next »

Problem Specification

Consider the square plate of uniform thickness with a circular hole with dimensions shown in the figure below. The plate is uniaxially loaded with a uniform pressure p=1 MPa. In addition, the plate is made of a Glass/Epoxy composite material with the fibers oriented in same direction as the applied load. The material properties are as follows:

Young's modulus in the fiber direction Ex = 59.3 GPa
Young's modulus in the transverse direction Ey = 22 GPa
In-plane shear modulus Gxy = 8.96 GPa
Major Poisson's ratio nxy = 0.26
Minor Poisson's ratio nyx= 0.047

The circumferential stress concentration on the boundary of the hole is to be determined using ANSYS.

Go to Step 1: Create Command Log file

Go to all ANSYS Learning Modules

  • No labels