Problem Specification
1. Create Geometry in GAMBIT
2. Mesh Geometry in GAMBIT
3. Specify Boundary Types in GAMBIT
4. Set Up Problem in FLUENT
5. Solve
6. Analyze Results
7. Change the domain size
8. Unsteady Flow
Mesh Geometry in GAMBIT
Mesh Faces
Operation Toolpad > Mesh Command Button > Edge Command Button > Mesh Edges
Edge BCD and BMD: interval count 50 for each
Edge DE: Ratio 1.05 and interval count 40
Edge BI: Ration 1.05 and interval count 70
Edge EF and EL: Ration 1 and interval count 10 for each
Edge HI and JI: Ration 1 and interval count 10 for each
Edge FG and LK: Ration 1 and interval count 5 for each
Edge GH and KJ: Ration 1 and interval count 21 for each
Operation Toolpad > Mesh Command Button > Face Command Button > Mesh Faces
Select Face1, choose Tri for Element and Pave for Type, and click Apply.
Repeat this for Face2.
Your mesh should look similar as follows:
Go to [Step 3: Specify Boundary Types in GAMBIT|FLUENT - Flow Past a Cylinder - Step 3].