FLUENT - Flow Past a Cylinder - Step 2

Mesh Geometry in GAMBIT

Mesh Faces

Operation Toolpad > Mesh Command Button > Edge Command Button > Mesh Edges

Edge BCD and BMD: interval count 50 for each

Edge DE: Ratio 1.05 and interval count 40

Edge BI: Ration 1.05 and interval count 70

Edge EF and EL: Ration 1 and interval count 10 for each

Edge HI and JI: Ration 1 and interval count 10 for each

Edge FG and LK: Ration 1 and interval count 5 for each

Edge GH and KJ: Ration 1 and interval count 21 for each

Operation Toolpad > Mesh Command Button > Face Command Button > Mesh Faces

Select Face1, choose Tri for Element and Pave for Type, and click Apply.

Repeat this for Face2.

Your mesh should look similar as follows:

Go to Step 3: Specify Boundary Types in GAMBIT.

See and rate the complete learning module.

Go to all FLUENT Learning Modules