You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

 

Unable to render {include} The included page could not be found.

Flow in a S-Duct

Created using ANSYS 18.1

Problem Specification

S-ducts, or serpentine inlets, are commonly found in jet engines due to their ability to allow shorter fins and rudders closer to the engine in the longitudinal direction. S-ducts are found in many other applications, from basic HVAC to complex F1 racing.


In this tutorial, the velocity vectors and pressure profile will be simulated in an S-duct. The flow volume has been provided. Flow will enter the large volume upstream of the S-duct and exit from the end protruding from the large volume. The pressure at the inlet will be 88744 [Pa] and the outlet will be supersonic.




Go to Step 1: Start-Up

Go to all (ANSYS or FLUENT) Learning Modules

  • No labels