Skip to end of metadata
Go to start of metadata

 

Solution/Results

Press the Results button in the Workflow to extract information from the simulation. In order to find information that can be readily used, first press Evaluate Results. Once the evaluation is complete, AIM will automatically output a vector in the Results section under Objects. The vectors will show air velocity, but may be difficult to see.


Select the Velocity Vector to edit the settings with which the vectors are defined. Change the Symbol distribution to Based on mesh, then press Evaluate. Press the Play button in the model window to see how these velocity vectors develop over time.

To create a contour of the velocity inside the fluid volume, create a Plane to bisect the flow volume. The initial orientation of the plane should be as intended. Once the plane has been created, use the Add drop down menu in the Results panel to create a Contour whose Location is the plane and Variable is Velocity Magnitude.

 


Go to Step 6: Validation

Go to all ANSYS AIM Learning Modules

  • No labels