Numerical Results
Deformed Shape
The following video shows how to plot the deformed shape and use it to check if the displacement constraints have been applied correctly.
Unknown macro: {latex} Unknown macro: {bf $sigma_x$} Contours">Unknown macro: {latex} Unknown macro: {bf $sigma_x$} Contours
We next take a look at
$\sigma_x$
variation in the model.
You can save an image of the contours to a file using the instructions below.
Below, we take a closer look at the
$\sigma_x$
variation on the front face and compare it to what we expect from beam bending theory.
We interrogate
$\sigma_x$
variation in the interior of the model using "section planes".
Unknown macro: {latex} $
Unknown macro: {bf sigma_x}
$
alongaLineusing"Path"Operations">Unknown macro: {latex} $
Unknown macro: {bf sigma_x}
$
along a Line using "Path" Operations
$
$
First, we create two coordinate systems which we'll use to define the start and end points of the line.
Second, we create the desired line on the front face.
Last, we extract
$\sigma_x$
along the line and export the results to an Excel file.
[*Go to Step 7: Verification & Validation*]