You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Problem Specification
1. Pre-analysis
2. Geometry
3. Mesh
4. Setup (Physics)
5. Solution
6. Results
7. Verification and Validation
Exercises

Step 1: Pre-analysis

Unknown macro: {composition-setup}

cloak.toggle.type = none

Unknown macro: {cloak}

Highlight each line of the above panel and insert the appropriate links to the other pages of your tutorial

Highlight the bold line at the bottom of the page that read "Go to Step...". Insert the appropriate link to the next page of your tutorial.

Enter any relevant text, images, and videos in the space under where it says "cloak" below

Engineering Data

There are two Materials that need to be added.

CFRP M55J/CE Quasi-Iso

Density: 1750 kg/mm^3
Tensile Yield Strength: 300 MPa
Tensile Ultimate Strength: 400 MPa
Compressive Ultimate Strength300 MPa

Invar 36

*Density:*8050 kg/m^3
*Tensile Yield Strength:*276 MPa
*Tensile Ultimate Strength:*448 MPa

Go to Step 2: Geometry
Go to all ANSYS Learning Modules

  • No labels