{include: ANSYS Google Analytics}
{panel}
Problem Specification
*1. Pre-analysis*
2. Geometry
3. Mesh
4. Setup (Physics)
5. Solution
6. Results
7. Verification and Validation
Exercises
{panel}

h2. Step 1: Pre-analysis

{composition-setup}
cloak.toggle.type = none
{composition-setup}
{cloak:id=cloaked}
Highlight each line of the above panel and insert the appropriate links to the other pages of your tutorial

Highlight the bold line at the bottom of the page that read "Go to Step...".  Insert the appropriate link to the next page of your tutorial.

Enter any relevant text, images, and videos in the space under where it says "cloak" below
{cloak}

h2. Engineering Data

There are two Materials that need to be added.

*{+}CFRP M55J/CE Quasi-Iso{+}*

*Density:* 1750 kg/mm^3
*Tensile Yield Strength:* 300 MPa
*Tensile Ultimate Strength:* 400 MPa
*Compressive Ultimate Strength{*}300 MPa

*{+}Invar 36{+}*

*Density:*8050 kg/m^3
*Tensile Yield Strength:*276 MPa
*Tensile Ultimate Strength:*448 MPa


Go to Step 2: Geometry
[Go to all ANSYS Learning Modules|SIMULATION:ANSYS Learning Modules]