SimCafe

Space shortcuts

Child pages
  • Turbulent Pipe Flow (LES) - Verification & Validation
  • Created by user-c6244, last modified by user-be015 on Oct 30, 2012

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

Unable to render {include} The included page could not be found.

Author: Ranjith Tirunagari, Cornell University

Problem Specification
1. Pre-Analysis & Start-Up
2. Geometry
3. Mesh
4. Setup (Physics)
5. Solution
6. Results
7. Verification & Validation

Step 7: Verification & Validation

In order to verify the LES solution to the turbulent pipe flow problem, we will compare it against the solution obtained using standard k-e model.

Turbulent Pipe with k-e model

In the Workbench Project Page, left-click on the downward pointing arrow on the top-left corner of the "TurbulentPipeLES" project and select Duplicate from the drop down menu as shown in the figure below.
Click here for higher resolution
A new project will be created. Rename this new project as "TurbulentPipeRANS" as shown in figure below.

Go to Problem Specification
Go to all FLUENT Learning Modules

  • No labels