Unable to render {include} The included page could not be found.
Author: John Singleton, Cornell University
Problem Specification
1. Pre-Analysis & Start-Up
2. Geometry
3. Mesh
4. Setup (Physics)
5. Solution
6. Results
7. Verification and Validation
Exercises
7. Verification and Validation
It is always imperative to verify simulation results. For this simulation, we will verify the results for the dimensionless temperature along the line y=1. The plot below contains, the analytical solution, and the ANSYS solution for three different meshes.
Go to Exercises
See and rate the complete Learning Module
Go to all ANSYS Learning Modules