Unable to render {include} The included page could not be found.
Author: John Singleton, Cornell University
Problem Specification
1. Pre-Analysis & Start-Up
2. Geometry
3. Mesh
4. Setup (Physics)
5. Solution
6. Results
7. Verification and Validation
Exercises
5. Solution
In this section several outputs will be specified before we have ANSYS solve.
Temperature
To specify the temperature as an output (Right Click) Solution > Insert > Thermal > Temperature, as shown below.
Total Heat Flux
In order to have ANSYS solve for the Total Heat Flux, (Right Click) Solution > Insert > Thermal > Total Heat Flux, as shown below.
Directional Heat Flux
In order to have ANSYS solve for the Directional Heat Flux, (Right Click) Solution > Insert > Thermal > Directional Heat Flux, as shown below.
Execute the Solver
In order to have ANSYS solve for the previously defined results (Click) Solve, .