Sign-up for free online course on ANSYS simulations!Unable to render {include} The included page could not be found.
Author: John Singleton, Cornell University
Problem Specification
1. Pre-Analysis & Start-Up
2. Geometry
3. Mesh
4. Setup (Physics)
5. Solution
6. Results
7. Verification and Validation
Exercises
1. Pre-Analysis and Start-Up
Open ANSYS Workbench
Find where the ANSYS shortcut is located and launch ANSYS Workbench, as shown below.
Steady-State Thermal Analysis System
The problem at hand is a steady state thermal problem, thus the steady-state thermal analysis system will be used. Click on Steady-State Thermal(ANSYS) as shown in the image below.
Continue to hold down the left mouse button and drag Steady-State Thermal (ANSYS) into the Project Schematic area. You will then see a green rectangle appear as shown below.
Drag Steady-State Thermal (ANSYS) to the green box which will then turn red and contain text saying "Create standalone system".
Now, release the left mouse button to create the standalone system. Your Project Schematic window should look comparable to the image below.
Lastly, rename the system to "2D Steady Conduction".