You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 25 Next »

Unknown macro: {alias}

Author: Rajesh Bhaskaran, Cornell University
Problem Specification
[1. Pre-Analysis & Start-up]
[2. Geometry]
[3. Mesh]
[4. Setup (Physics)]
[5. Solution]
[6. Results]
[7. Verification and Validation]

Problem Specification



Consider air flowing across a flat plate boundary layer with a length of 1m and a vertical air flow length of 0.5m (this is valued used in this simulation, another suitable value can be chosen by the user). The fluid is flowing in the x-direction with a velocity of 1 m/s and the air flow exhausts into the ambient atmosphere which is at 1 atm. Take density to be 1 kg/m^3 and viscosity to be 10 x 10 ^(-3). Solve the problem using Fluent. The Reynold's number based on the plate length is 10,000. Plot the center line velocity and velocity profile at the outlet. Validate your results.


[Go to Step 1: Pre-Analysis and Start-up]

See and rate the complete Learning Module

Go to all FLUENT Learning Modules

  • No labels