SimCafe

Space shortcuts

Child pages
  • ANSYS 12 - Beam - Problem Specification
  • Created by user-8c4ec, last modified by user-311c2 on Jul 12, 2010

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Next »

Unable to render {include} The included page could not be found.

Note Title

The following ANSYS tutorial is under construction.

Problem Specification

Consider the beam in the figure below. There are two point forces acting on the beam in the negative y direction as shown. Note the dimensions of the beam. The Young's modulus of the material is 73 GPa and the Poisson ratio is 0.3. We'll assume that plane stress conditions apply.


Go to Step 1: Pre-Analysis & Start-Up

See and rate the complete Learning Module

Go to all ANSYS Learning Modules

  • No labels