cloak.toggle.exclusive=false
Due to the high price of CPVC 1/2" caps, other options for plate settler construction are being considered. Below is a cost analysis of other options that have been proposed.
Unknown macro: {toggle-cloak} CapandScrewAttachment">Unknown macro: {toggle-cloak} Cap and Screw Attachment
|
Quantity |
Cost (lempira) |
Cost (Dollar) |
Total Cost |
Cost/sq ft |
Caps |
896 |
9 |
$ 0.48 |
$ 426.89 |
$ 8.71 |
Screws |
384 |
4 |
$ 0.21 |
$ 81.31 |
$ 1.66 |
Nuts |
384 |
0.75 |
$ 0.04 |
$ 15.25 |
$ 0.31 |
Lamina |
19 |
900 |
$ 47.64 |
$ 905.24 |
$ 18.47 |
Total |
|
|
|
$ 1,428.69 |
$ 29.16 |
Costs are based on one sedimentation tank.
One sheet of lamina is 900 Lempiras, and is 12 feet long. Each lamina in the plate settler is 3 feet long, so four lamina can be made from one sheet. The tank is 4.3 meters long, and there are lamina every 5 cm, so 86 lamina are needed, or 29 sheets per tank.
The tank dimensions are 14 feet long by 42 inches wide, giving an area of 49 square feet.
Unknown macro: {toggle-cloak} BoltandSpacerAttachment">Unknown macro: {toggle-cloak} Bolt and Spacer Attachment
Unknown macro: {toggle-cloak} PipeandCouplingAttachment">Unknown macro: {toggle-cloak} Pipe and Coupling Attachment
The cost of couplings and pipe were taken off Mcmastercarr.com, and may not reflect actual prices in Honduras.
The couplings are 4 cm long, therefore lamina spacing is 4 cm rather than 5 cm. This means that a total of 36 twelve foot sheets of lamina are needed.
Unknown macro: {toggle-cloak} BrentwoodIndustriesCommercialProducts">Unknown macro: {toggle-cloak} Brentwood Industries Commercial Products
IFR-6036 tube settler cost approximately $24 per square foot.
Brentwood Ind. Tube Settlers & Plate Settlers
plate settlers in 3' lengths and 42" widths would be approximately $48 per square foot.
These prices do not take consider the cost of shipping.