FLUENT - Forced Convection - Step 2

Step 2: Geometry

In the Project Schematic of Workbench window, right click on Geometry and select Properties. You will see the properties menu on the left of the Workbench window. Under Advance Geometry Options, change the Analysis Type to 2D.

In the Project Schematic, double left click on Geometry to start preparing the geometry.

At this point, a new window, ANSYS Design Modeler will be opened. You will be asked to select desired length unit. Use the default meter unit and click OK.

Go to Step 2: Geometry

See and rate the complete Learning Module

Go to all FLUENT Learning Modules