Versions Compared


  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Migrated to Confluence 5.3


Problem Specification
1. Pre-Analysis & Start-up
2. Geometry
3. Mesh
4. Setup (Physics)
5. Solution
6. Results
7. Verification & Validation

Problem Specification

Consider a 15° angle wedge at zero angle of attack. The incoming flow conditions are: M1=3, p1=1 atm, T1=300 K. Use FLUENT to obtain the flowfield over the wedge. Compare the pressure coefficient on the wedge surface with the corresponding analytical result for an oblique shock.

Go to Step 1: Pre-Analysis & Start-up

See and rate the complete Learning Module

Go to all FLUENT Learning Modules