Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Migrated to Confluence 5.3
Panel

Problem Specification
1. Start-up and preliminary set-up
2.

...

Specify element type and constants

...

3. Specify material properties
4. Specify geometry
5. Mesh geometry
6. Specify boundary conditions
7. Solve!
8. Postprocess the results
9. Validate the results

Step 3: Specify material properties

Main Menu > Preprocessor >Material Props > Material Models

In the Define Material Model Behavior menu, double-click on Structural, Linear, Elastic, and Isotropic.

Image Added

Enter 2.8E7 for Young's modulus EX, 0.3 for Poisson's Ratio PRXY. Click OK.

Image Added

To double-check the material property values, double-click on Linear Isotropic under Material Model Number 1 in the Define Material Model Behavior menu. This will show you the current values for EX and PRXY. Cancel the Linear Isotropic Properties window.

This completes the specification of Material Model Number 1. When we mesh the geometry later on, we'll use the reference no. 1 to assign this material model. Close the Define Material Model Behavior menu.

Save your work

Toolbar > SAVE_DB

...

Include PageSIMULATION:ANSYS - Crank 3 Specify material properties ContentSIMULATION:ANSYS - Crank 3 Specify material properties Content

Go to Step 4: Specify geometry

See and rate the complete Learning Module

Go to all ANSYS Learning Modules