...
Include Page | ||||
---|---|---|---|---|
|
Cantilever Beam
Created using ANSYS 13.0
Problem Specification
Consider the beam in the figure below. It is clamped on the left side and has a point force of 8kN acting downward on the right end of the beam. The beam has a length of 4 meters, width of 0.346 meters and height of 0.346 meters (cross-section is a square). Additionally, the beam is composed of a special material called Cornellium which has a Young's Modulus of 2.8x10^10 Pa. Using ANSYS, calculate the following:
...