Page History

...

To view the .igs files, go to the pull down menu to the left of the File name text box and change it to Geometry File(...). Go to the location where you saved the monocoque.igs and click Open. Your workbench should look this:

Build the Geometry

This particular geometry have contains solids, surfaces and line bodies. In default setting, Ansys do not build the line bodies, but we can change that with following steps:

Double click Geomtry  to bring up the Design Modeler

Select  inch  as the unit and hit  OK 

Under Detail View Penal, change Line Bodies to  Yes  as shown below:

Image Added

Now CLick  Generate  to build the geometry.

This will make sure line bodies will be built along with the surface and solids.

Go to Step 2 - Geometry
Go to all ANSYS Learning Modules