SimCafe

Space shortcuts

Child pages
  • Modal Analysis of a Composite Monocoque - Pre-Analysis & Start-Up

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

Unable to render {include} The included page could not be found.

Problem Specification
1. Pre-analysis & Start-Up
2. Geometry
3. ACP(Pre)
4. Mesh and Setup
5. Mechanical Solution
6. Mechanical Results
5. ACP(Post) Solution
6. ACP(Post) Results
8. Verification & Validation

Pre-analysis & Start-Up

Open ANSYS Workbench

Open ANSYS Workbench by going to Start > All Programs > ANSYS 14.0 > Workbench 14.0. This will open the start up screen as seen below:

Name the project: Modal Analysis of a Composite Monocoque.

Import Geometry

To Import Geometry, go to File->Import... A dialog box will open as shown below:

To view the .igs files, go to the pull down menu to the left of the File name text box and change it to Geometry File(...). Go to the location where you saved the monocoque.igs and click Open. Your workbench should look this:

  • No labels