Page History

...

Select Volumes, By Num/Pick, From Full and click Apply. Pick the crank volume and click OK. After we've selected a volume, we must next select all the elements in this volume. In the Select Entities window, select Elements, Attached to, Volumes and click Apply. Click Replot to display the new selection. Notice the deformation is exaggerated, revealing that deformation is primarily caused by torsion.

https://confluence.cornell.edu/download/attachments/82384591/NS_vonmises_refine.jpg?version=1

To select the whole model again, go to Utility Menu > Select > Everything.

...