Page History

...

The meshed face should look as follows:

Image AddedImage Removed
(Click picture for larger image)

Next mesh face face2 in a similar fashion.

The resultant mesh should look as follows:

Image Removed
 (Click picture for larger image)

Note that for each mesh face, we only define 2 mesh edges. Gambit will automatically define the other two mesh edge for face mesh creation. Manual mesh of all edges can be done if more control of the mesh is required. Please refer to the index of the GAMBIT User Guide and look under Edge>Meshing for explanation on other type of meshing parameters.

Go to Step 3: Specify Boundary Types in GAMBIT

...