Panel |
---|
Problem Specification. |
Mesh Geometry in GAMBIT
Mesh Faces
Operation Toolpad > Mesh Command Button > Edge Command Button > Mesh Edges
Edge BCD and BMD: interval count 50 for each
Edge DE: Ratio 1.05 and interval count 40
Edge BI: Ration 1.05 and interval count 70
Edge EF and EL: Ration 1 and interval count 10 for each
Edge HI and JI: Ration 1 and interval count 10 for each
Edge FG and LK: Ration 1 and interval count 5 for each
Edge GH and KJ: Ration 1 and interval count 21 for each
Operation Toolpad > Mesh Command Button > Face Command Button > Mesh Faces
Select Face1, choose Tri for Element and Pave for Type, and click Apply.
Repeat this for Face2.
Your mesh should look similar as follows:
Go to Step 3: Specify Boundary Types in GAMBIT.