Problem Specification.
1. Create Geometry in GAMBIT.
2. Mesh Geometry in GAMBIT.
3. Specify Boundary Types in GAMBIT.
4. Set Up Problem in FLUENT.
5. Solve.
6. Analyze Results.
7. Change the Domain Size.
8. Unsteady Flow.
Problem Set.
Citations.

Mesh Geometry in GAMBIT

Mesh Faces

Operation Toolpad > Mesh Command Button > Edge Command Button > Mesh Edges

Edge BCD and BMD: interval count 50 for each

Edge DE: Ratio 1.05 and interval count 40

Edge BI: Ration 1.05 and interval count 70

Edge EF and EL: Ration 1 and interval count 10 for each

Edge HI and JI: Ration 1 and interval count 10 for each

Edge FG and LK: Ration 1 and interval count 5 for each

Edge GH and KJ: Ration 1 and interval count 21 for each

Operation Toolpad > Mesh Command Button > Face Command Button > Mesh Faces

Select Face1, choose Tri for Element and Pave for Type, and click Apply.

Repeat this for Face2.

Your mesh should look similar as follows:

Go to Step 3: Specify Boundary Types in GAMBIT.

See and rate the complete learning module.

Go to all FLUENT Learning Modules