Author: John Singleton and Rajesh Bhaskaran
Problem Specification
1. Pre-Analysis & Start-Up
2. Geometry
3. Mesh
4. Setup (Physics)
5. Solution
6. Results
7. Verification and Validation
Exercises
Under Construction!!
Problem Specification
In this tutorial we will simulate steady state flow past a cylinder. We will use a Reynolds number of 20. Thus the fluid velocity will be 1 m/s, the fluid density will be 1 kg/m^3, the fluid viscosity will be 0.05 kg/m*s and the pipe diameter will be 1 m.
Go to Step 1: Pre-Analysis and Start-Up
See and rate the complete Learning Module
Go to all FLUENT Learning Modules