AutoCAD Flocculation Tank Program - Floctankscript1

General Program Information

Technical Program Outline

layer1 - Layer_new creates a new dark grey layer, "floctank."

layer1 <- layer_new("floctank",dkgrey)

Unknown macro: {float}

Northeast Isometric View

tank1 - Calls the Tank Program to create a tank.

tank1 <- Tank(floc_origin,totalfloc_dim,tank_thick)

floc_origin =

x: tank_origin0
y: tank_origin1 + num_tanks(tank_dim1 + tank_thick)
z: tank_origin2

totalfloc_dim =

x: floc_dim0
y: (numfloc_tanks*floc_dim1) + ((numfloc_tanks - 1)*tank_thick)
z: floc_dim2

tank_thick - specifies the thickness of the tank.

Unknown macro: {float}

Northeast Isometric View

box1 - Creates a box based on two points.

box1 <- box(wall_origin,wall_origin + wall_dim)

wall_origin =

x: tank_origin0 - floc_dim0 - tank_thick
y: tank_origin1 + num_tanks(tank_dim1 + tank_thick) + floc_dim1)
z: tank_origin2

wall_dim =

x: totalfloc_dim0 + (2tank_thick)
y: tank_thick
z: totalfloc_dim2

Unknown macro: {float}

Northeast Isometric View
box2 - Creates a box based on two points.

box2 <- box(hole_origin,hole_origin + flochole_dim)

hole_origin =

x: tank_origin0 - flochole_dim0
y: tank_origin1 + num_tanks(tank_dim1 + tank_thick) + floc_dim1
z: tank_origin2

flochole_dim =

x: tank_dim0
y: tank_dim1/numfloc_tanks
z: tank_dim2

Unknown macro: {float}

Top View
subtract0 - SubtractD subtracts one object from the other based on two points.

subtract0 <- subtractD(p1,hole_origin)

p1 =

x: hole_origin0 + flochole_dim0 + tank_thick
y: hole_origin1
z: hole_origin2

hole_origin =

x: tank_origin0 - flochole_dim0
y: tank_origin1 + num_tanks(tank_dim1 + tank_thick) + floc_dim1
z: tank_origin2

union1 - Union_C selects objects based on two points and unites them into a single object.

union1 <- unionC(p1,p2)

p1 =

x: floc_origin0 - totalfloc_dim0 - tank_thick - zc
y: floc_origin1 - tank_thick - zc
z: floc_origin2

p2 =

x: floc_origin0 + tank_thick + zc
y: floc_origin1 + totalfloc_dim1 + tank_thick + zc
z: floc_origin2
Unknown macro: {float}

Northeast Isometric View
box3 - Creates a box based on two points.

box3 <- box(p1,p2)

p1 =

x: floc_origin0 - totalfloc_dim0
y: floc_origin1 - tank_thick
z: floc_origin2 + totalfloc_dim2 - channel_dim2

p2 =

x: floc_origin0 - totalfloc_dim0 + channel_dim1
y: floc_origin1
z: floc_origin2 + totalfloc_dim2

Unknown macro: {float}

Top View
subtract1 - SubtractD subtracts one object from the other based on two points.

subtract1 <- subtractD(floc_origin,p1)

floc_origin =

x: tank_origin0
y: tank_origin1 + num_tanks(tank_dim1 + tank_thick)
z: tank_origin2

p1 =

x: floc_origin0 - floc_dim0
y: floc_origin1 - tank_thick
z: floc_origin2 + floc_dim2 - channel_dim2

layerset - Layer_set selects the layer "0".

layerset <- layer_set("0")

layerfreeze - Layer_freeze locks the layer "channel" so that it cannot be edited.

layerfreeze <- layer_freeze("floctank")

Page tree

AutoCAD Flocculation Tank Program - Floctankscript1

General Program Information

Technical Program Outline