You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 18 Next »

Author: Rajesh Bhaskaran, Cornell University

Problem Specification
1. Create input file
2. Modify and read input file

Problem Specification

Consider the semi-monocoque shell problem analyzed in a previous tutorial. Redo the problem changing only the number of stiffeners in the x-direction. For the quarter-plate, increase the number of x-stiffeners to 3 as shown below; previously, we had 2. Compare the displacement and stress values for the new and old cases and comment on the differences and/or similarities.

We'll play smart and avoid plodding through the solution procedure from scratch by using ANSYS capabilities for performing parametric studies.

Go to Step 1: Create input file

Go to all ANSYS Learning Modules

  • No labels