Step 1 Create Geometry in GAMBIT

Problem Specification
1. Create Geometry in GAMBIT
2. Mesh Geometry in GAMBIT
3. Specify Boundary Types in GAMBIT
4. Set Up Problem in FLUENT
5. Solve
6. Analyze Results
7. Refine Mesh
Problem 1

Step 1: Create Geometry in GAMBIT

Since the flow is axisymmetric, the geometry is a rectangle as in the Laminar Pipe Flow tutorial. We will first use a 100x30 mesh (i.e. 100 divisions in the axial direction and 30 divisions in the radial direction).

We could create this mesh from scratch, as in the Laminar Pipe Flow tutorial, but instead, we will modify the previous 100x5 to get the 100x30 mesh. This will introduce you to the art of modifying meshes in GAMBIT.

Go to Step 2: Mesh Geometry in GAMBIT