John wrote:
We'd like to design for a max flow of 150 gal/min in Tamara.
Remembering how we've made the designs in the past, I think the min
flow was usually half of the max flow, which would give us a min flow
of 75 gal/min.
The floc tank is divided into 2 sections that are each 4.60m x 0.52m.
In the bottom of the wall at the end of the tanks there is a space
that is 1.00m x 0.30m for the water to pass from the first part to the
second.
The tanks also have a sloped floor, that drops 12 cm from one end to the other.
The water should start out 2.32m deep at the entrance of the first section.
We would like to leave the first 35cm at the beginning of the tank for
an elbow that the water will enter through.
Attached is a diagram that should explain this better.