Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 10 Next »

Problem Specification

Consider the heat sink shown in gray in the image below. It is used to dissipate the heat from an LED and a thin interface layer shown in green below. The CAD file containing the LED + interface + heat sink can be downloaded here.

  • LED and heat sink are made of Aluminum: k=186 W/(m C)
  • For the interface: k=48 W/(m C)
  • Heat generated by LED: 3.3×107 W/m3  
  • Ambient temperature: 40 C
  • Convection coefficient for heat sink surfaces exposed to air: 14 W/(m2 C)

Find temperature and heat flux distribution in the model. Verify results by checking overall energy conservation and refining the mesh.


Model Setup

Numerical Results

Energy Balance and Mesh Refinement

Go to all ANSYS Learning Modules

  • No labels