You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 43 Next »

Unknown macro: {float}


NorthEast Isometric View



Manifold Drawing Script

layer5 - Layernew creates a new blue layer "manifold."

layer5 <- layernew("manifold',blue2)

Unknown macro: {float}


Top View

manifold1 - Calls the Manifold Program to create a manifold.

manifold1 <-Manifold(manifoldorigin,NDSedLaunder,DSedLaunderOrifice/2,manifoldlength,BSedLaunderOrifices,ENPipeSpec)
manifoldorigin =

  • if layout 1:
    • x: tankorigin0 - LSed + WChannel + TChannelWall + 2*ElbowRadius(NDSedLaunder)
    • y: tankorigin1 + WSed/2
    • z: tankorigin2 + HWSed - HSedAbove/2
  • if layout 2:
    • x: tankorigin0 - LSed + WChannel + TChannelWall
    • y: tankorigin1 + WSed/3
    • z: tankorigin2 + HWSed - HSedAbove/2
  • if layout 3:
    • x: tankorigin0 - LSed + WChannel + TChannelWall + WEChannel
    • y: tankorigin1 + WSed/3
    • z: tankorigin2 + HWSed - HSedAbove/2
  • if layout 4:
    • x: tankorigin0 - LSed + WChannelInlet + TChannelWall + WEChannel
    • y: tankorigin1 + WSed/3
    • z: tankorigin2 + HWSed - HSedAbove/2

NDSedLaunder - Nominal diameter of launder.

DSedLaunderOrifice - Diameter of launder orifices.

manifoldlength - Specifies manifold length.

BSedLaunderOrifices - Spacing between orifices throughout the launder.

ENPipeSpec - Enumerated type.

Unknown macro: {float}


Top View

rotate18 - Rotate3d turns the object based on a given axis and degree angle.

rotate18 <- rotate3d(p1,manifoldorigin,"y",90)

p1 =

  • x: manifoldorigin0 + innerD(NDsedLaunder,ENPipeSpec)/2
  • y: manifoldorigin1
  • z: manifoldorigin2
    manifoldorigin =
  • if layout 1:
    • x: tankorigin0 - LSed + WChannel + TChannelWall + 2*ElbowRadius(NDSedLaunder)
    • y: tankorigin1 + WSed/2
    • z: tankorigin2 + HWSed - HSedAbove/2
  • if layout 2:
    • x: tankorigin0 - LSed + WChannel + TChannelWall
    • y: tankorigin1 + WSed/3
    • z: tankorigin2 + HWSed - HSedAbove/2
  • if layout 3:
    • x: tankorigin0 - LSed + WChannel + TChannelWall + WEChannel
    • y: tankorigin1 + WSed/3
    • z: tankorigin2 + HWSed - HSedAbove/2
  • if layout 4:
    • x: tankorigin0 - LSed + WChannelInlet + TChannelWall + WEChannel
    • y: tankorigin1 + WSed/3
    • z: tankorigin2 + HWSed - HSedAbove/2

"y" - specifies axis that object will be rotated about.

90 - rotation angle

Unknown macro: {float}


Top View

Unknown macro: {float}


Right View

rotate19 - Rotate3d turns the object based on a given axis and degree angle.

rotate19 <- rotate3d(p1,manifoldorigin,"x",-60)

p1 =

  • x: manifoldorigin0
  • y: manifoldorigin1 + innerD(NDsedLaunder,ENPipeSpec)/2
  • z: manifoldorigin2

manifoldorigin =

  • if layout 1:
    • x: tankorigin0 - LSed + WChannel + TChannelWall + 2*ElbowRadius(NDSedLaunder)
    • y: tankorigin1 + WSed/2
    • z: tankorigin2 + HWSed - HSedAbove/2
  • if layout 2:
    • x: tankorigin0 - LSed + WChannel + TChannelWall
    • y: tankorigin1 + WSed/3
    • z: tankorigin2 + HWSed - HSedAbove/2
  • if layout 3:
    • x: tankorigin0 - LSed + WChannel + TChannelWall + WEChannel
    • y: tankorigin1 + WSed/3
    • z: tankorigin2 + HWSed - HSedAbove/2
  • if layout 4:
    • x: tankorigin0 - LSed + WChannelInlet + TChannelWall + WEChannel
    • y: tankorigin1 + WSed/3
    • z: tankorigin2 + HWSed - HSedAbove/2

"x" - specifies axis that object will be rotated about.

-60 - rotation angle

Unknown macro: {float}


Top View

copym - CopyB duplicates the selected object.

copym <- copyB(manifoldorigin,manifoldorigin,manifold2origin)

manifoldorigin =

  • if layout 1:
    • x: tankorigin0 - LSed + WChannel + TChannelWall + 2*ElbowRadius(NDSedLaunder)
    • y: tankorigin1 + WSed/2
    • z: tankorigin2 + HWSed - HSedAbove/2
  • if layout 2:
    • x: tankorigin0 - LSed + WChannel + TChannelWall
    • y: tankorigin1 + WSed/3
    • z: tankorigin2 + HWSed - HSedAbove/2
  • if layout 3:
    • x: tankorigin0 - LSed + WChannel + TChannelWall + WEChannel
    • y: tankorigin1 + WSed/3
    • z: tankorigin2 + HWSed - HSedAbove/2
  • if layout 4:
    • x: tankorigin0 - LSed + WChannelInlet + TChannelWall + WEChannel
    • y: tankorigin1 + WSed/3
    • z: tankorigin2 + HWSed - HSedAbove/2

manifold2origin =

  • if layout 1:
    • x: 0
    • y: 0
    • z: 0
  • if layout 2:
    • x: tankorigin0 - LSed + WChannel + TChannelWall
    • y: tankorigin1 + 2*WSed/3
    • z: tankorigin2 + HWSed - HSedAbove/2
  • if layout 3:
    • x: tankorigin0 - LSed + WChannel + TChannelWall + WEChannel
    • y: tankorigin1 + 2*WSed/3
    • z: tankorigin2 + HWSed - HSedAbove/2
  • if layout 4:
    • x: tankorigin0 - LSed + WChannelInlet + TChannelWall + WEChannel
    • y: tankorigin1 + 2*WSed/3
    • z: tankorigin2 + HWSed - HSedAbove/2

      layerset - Layerset selects the layer "0".

layerset <- layerset("0")

layerfreeze5 - Layerfreeze locks the layer "manifold" so that it cannot be edited.

layerfreeze5 <- layerfreeze("manifold")

  • No labels