Instructions to connect the Tandberg C20 video conferencing system in EMC2 to Cornell Zoom.Michael Hint connected the Tandberg to Zoom. Here's how:
0) Meeting organizer must enable call in from room system (Tandberg, in this case) and provide Zoom Meeting ID
- https://support.zoom.us/hc/en-us/articles/203736425-H-323-SIP-Room-Connector-Call-out
- Invite a Room System
- Provide Zoom Meeting ID number.
1) Start the Tandberg system
Be patient since the Tandberg system takes a while to boot up.
- Ensure LG TV is on.
- Lower on using LG controller, or via power button to the right of the LG TV.
- Select input HDMI 4.
- Use either LG controller or side buttons of TV itself.
- FYI: The Mac mini is on HDMI 1.
2) Connect it to Zoom
Press phone book button on Tandberg controller.
- Bouton looks like an open book, and iis to the left of the Home button.
Select "My Contacts", and then select Zoom, and finally select "Call".
- On Tandberg controller, use arrows to navigate, and the center "check mark" to select entries.
3) Enter Zoom Meeting ID and join the meeting
Press number keys on Tandberg controller.
- Thiis is a unique 9-digit number for the meeting itself
Press the # key to join.
4) End the Zoom session
On Tandberg controller, press the red hang-up phone button.
Notes using the Tandberg system:
Speaker volume, both TV and Tandberg
Ensure BOTH LG (TV) volume is adjusted AS WELL AS the volume of the Tandberg system.
- If either is mute or too low, will not hear anything.
- LG TV's volume controllable with LG controller, or via volume switches to the right of the LG TV.
- Tandberg volume controllable with Tandberg controller.
- Tandberg's mute status shows on-screen.
Microphone mute
- Toggle mute of microphone either by clicking mute button on Tandberg microphone pad, OR clicking mute button on Tandberg controller.
- Mute status shows on-screen.
Tandberg camera direction (panning) and zooming in and out
- Control Tandberg camera's direction (left, right, up, down) with arrow keys on Tandberg controller.
- Control Tandberg camera's zooming in and out with the + and - keys on Tandberg controller.
- Zoom
Initial notes, from Oliver:
March 2018: Oliver spent time with the Tandberg C20 (Cisco) system, <av.emc2.cornell.edu>. These were his notes, FWIW:
1) Is system capable? "The system must be running TC 5.0.2 or higher or CE software to support OBTP (One Button To Push)."). Not listed as supported, either Standard nor Enhanced:
2) If supported, one would need to run a Windows system to connect system to Zoom, "A Windows PC, Server, or Virtual Machine, for installing and running the Zoom API Connector software locally":
3) Cornell's Zoom must also be properly licensed. From above URL, "A Zoom account with a Cloud Room Connector license".