You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 9 Next »

 


Start-Up

A few words on the formatting on the following instructions:

  1. Notes that require you to perform an action are colored in blue

  2. General information is colored in black, but does not require any action

  3. Words that are bolded are labels for items found in ANSYS AIM

  4. Most important notes are colored in red

We are ready begin simulating in ANSYS AIM. Open ANSYS AIM by going to Start > All Apps > ANSYS 18.1 > ANSYS AIM 18.1. Once you are at the starting page of AIM, select the Fluid Flow template as shown below. In order to use the units given to us in the problem, press the Home menu button in the top left corner and select Units > U.S. Customary. 
You will be prompted by the Fluid Flow Template to either Define new geometry, Import geometry file, or Connect to active CAD session. Select Import geometry file and press Next.


Go to Step 2: Geometry

Go to all (ANSYS or FLUENT) Learning Modules

  • No labels