Author(s): Sebastian Vecchi, ANSYS Inc.
Problem Specification
1. Pre-Analysis & Start-Up
2. Geometry
3. Mesh
4. Physics Setup
5. Results
6. Verification & Validation
Mesh
Close the Model Editor, then initiate the meshing process by clicking on Mesh in the workflow.
Set Mesh Size
Under Global Sizing, change the Size function method to Curvature.
Generate Mesh
Click Generate Mesh under Output or at the top of the screen by the status window for Mesh. AIM should detect you are ready to generate the mesh and highlight the buttons in blue. Below is an example of what the mesh should look like.