You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

 

Unable to render {include} The included page could not be found.

Geometry

Make a square

Click on the Z-axis on the compass in the bottom left corner of the screen to look at only the XY-plane. Right click in the empty white space and choose Select New Sketch Plane so that the plane we are building on will be on the XY-plane. Choose the rectangle drawing tool in the Sketch subgroup of the Design tab and click on Define rectangle from center . Select the origin and drag out the rectangle until it is the correct size or dimension the rectangle using the highlighted box, pictured below, that appears as you are making the rectangle. The height and width are 5 inches as defined by the problem.

Create Bar

Use the pull feature in the Edit subgroup and extrude the bar to 120 inches. The geometry is now complete and we can continue to meshing.



Go to Step 3: Mesh

Go to all (ANSYS or FLUENT) Learning Modules

  • No labels