You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 38 Next »

Mesh

Launch Mechanical

(double click) Model, , in the "Cantilever Modal" project.

Generate Default Mesh

First, (click) Mesh in the tree outline. Next, (click) Mesh > Generate Mesh as shown below.


Size Mesh

In this section we will size the mesh, such that it has ten uniform elements. In order to size the mesh, first expand Sizing located within the
Details of "Mesh" table. Next, set Element Size to 0.40 m, as shown below.



Now, (click) Mesh > Generate Mesh in order to generate the new mesh. You should obtain the mesh, that is shown in the following image.


Click Here for Higher ResolutionVisit page in new window


Note that in this simulation we are working with beam elements, which are simply line segments. As a visualization tool ANSYS displays a beam with width and height. In order to display the actual mesh (click) View > (deselect) Thick Shells and Beams. You will then see the mesh displayed in its native form.


Click Here for Higher ResolutionVisit page in new window


Save


Go to Step 4: Physics Setup

Go to all ANSYS Learning Modules

  • No labels