Prefabrication 1L/s (Prefab)
The goal of the Prefabrication 1 L/s team is to research, test, and determine fabrication methods for the full-scale plant production in Honduras. We also continue to design novel geometries for low-flow sedimentation tanks and flocculators, and refine the integration of the dosing, flocculation, sedimentation, and filtration processes in these smaller plants.Spring 2016
This semester, we successfully designed and fabricated a 1/9 scale model of the sedimentation tank. We showed that a large, plastic corrugated pipe was a potential low-weight, low-cost solution to traditional concrete tanks and determined that plastic welding was a viable fabrication method for tank construction in Honduras. We also succeeded in testing our sedimentation tank using a pre-existing tube flocculator in the lab and cleaned 50 NTU water to meet WHO standards.
Members Fall 2016
Felix Yang: fyy2@cornell.edu
Sean King: spk52@cornell.edu
Yinghan Hua: yh696@cornell.edu
Sung Min Kim: sk2795@cornell.edu
David Herrera Manzanedo: dh644@cornell.edu
Documents
| Challenges | Tasks | Symposium | Final Presentation | Final Report | Additional Documents |
| Spring '16 |  | |
|  | |
