Author: John Singleton, Cornell University

Problem Specification

1. Pre-Analysis & Start-Up

2. Geometry

3. Mesh

4. Physics Setup

5. Numerical Solution

6. Numerical Results

7. Verification & Validation

Exercises

Comments

# Pre-Analysis

## What's Under the ANSYS Blackbox?

To understand the framework of what's the ANSYS blackbox, go through the videos in the “What’s Under the Blackbox” section of our free online course on ANSYS-based simulations. Registration is required to access this page. We'll be using this framework in this tutorial.

## Mathematical Model

## Euler-Bernoulli Beam Theory

## Strains and Stresses

## Potential Energy

## Potential Energy Minimization

## Discretization

## Interpolation

## Algebraic Equations Derivation

## Hand Calculations

## Check Your Understanding

One or more of the following statements is/are true. Select which statements are true.

- 3D Elasticity theory makes the assumption that plane sections remain plane whereas the Euler-Bernoulli beam theory doesn’t make this assumption.
- In Euler-Bernoulli beam theory, the Poisson's ratio is assumed to be zero.
- If we have 4 nodes instead of 3, ANSYS will need to determine 8 parameters (4 y-displacements and 4 rotations) either from the essential boundary conditions or by solving a set of algebraic equations.
- If we have 4 nodes instead of 3, the number of algebraic equations that ANSYS will need to solve simultaneously will be 5.
- We have to determine the y-displacement of the midline at locations between the nodes using interpolation. This interpolation is given by a second-order polynomial.

Go to all ANSYS Learning Modules

We have to determine the y-displacement of the midline at locations between the nodes using interpolation. This interpolation is given by a second-order polynomial.