You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

3D Finite-Element Analysis of a Bike Crank

Created using ANSYS AIM 17.0

Learning Goals

In this tutorial, you will learn to:

  • (e.g.: Determine the displacements and stresses in a bike crank using 3D FEA capabilities in ANSYS Mechanical)
  • (e.g.: Verify the finite-element results from ANSYS by refining the mesh and also comparing with hand calculations)

Under Construction

Problem Specification

Under Construction

Go to Step 1: Pre-Analysis & Start-Up

Go to all (ANSYS or FLUENT) Learning Modules

  • No labels