You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

(Tutorial Name)

Created using ANSYS (Version Number)

Learning Goals

In this tutorial, you will learn to:

  • (e.g.: Determine the displacements and stresses in a bike crank using 3D FEA capabilities in ANSYS Mechanical)
  • (e.g.: Verify the finite-element results from ANSYS by refining the mesh and also comparing with hand calculations)

Under Construction

Problem Specification

Under Construction

 

Go to Step 1: Pre-Analysis and Start-Up

Go to all ANSYS Learning Modules

  • No labels