Sign-up for free online course on ANSYS simulations!
Unable to render {include} The included page could not be found.
Verification & Validation
compare blade velocity (TSR?) This is a BC, so it will essentially just check whether we had inputted the correct mathematical model into the tool.
Verification
Compare Cp with the expected
mesh refinements (different mesh. Summarize, don't need to show steps) Cp might be bad, refine the mesh and check.
Validation
check against FDRL data? Might have to re-scale, as it is a little larger, flow max at 7m/s and much greater rpm.... If you scale it up to xxx this is the results you'd get. Compare Cp, try using the actual wind speed and angular velocity.
Actually the angular velocity is coupled with the incoming velocity. To capture that with fluent, we would have to use 6DOF which is too complex. So a trick would be..... see jeremy email.
Under Construction