You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

Pre-Analysis & Start-Up

Pre-Analysis

In the Pre-Analysis step, we'll review the following:

  • Mathematical model: (e.g.: We'll look at the governing equations + boundary conditions and the assumptions contained within the mathematical model.)
  • Numerical solution procedure in ANSYS: (e.g.: We'll briefly overview the solution strategy used by ANSYS and contrast it to the hand calculation approach.)
  • Hand-calculations of expected results: (e.g.: We'll use an analytical solution of the mathematical model to predict the expected stress field from ANSYS. We'll pay close attention to additional assumptions that have to be made in order to obtain an analytical solution.)

Mathematical Model 

Under Construction

Numerical Solution Procedure in ANSYS

Under Construction

Hand-Calculations of Expected Results

Under Construction

Start-Up

Under Construction



Go to Step 2: Geometry

Go to all ANSYS Learning Modules

  • No labels