Wind Turbine Blade
Created using ANSYS 13.0
This tutorial has become obsolete, and will not be updated any more; We recommend that you follow this newer tutorial on fluid-structure analysis of a wind turbine blade. Thank you!
This tutorial is based on this M.Eng project report completed at Cornell University in 2011. In this exercise, we will examine the stresses and deformation of a wind turbine blade under a force load.
Click here to enlarge imageThe blade is composed of an outer surface and an inner spar. The spar is 0.02 meters thick and the outer surface is of varying thickness. A table containing the material properties of the two parts is below. Structural steel will be used for both the blade and the spar.
Young's Modulus (Pa)
0.03 - 0.00048485*X
We are now ready to open ANSYS Workbench
Go to Step 1: Pre-Analysis & Start-Up